|
|
|
|
|
EMP Protected Ethernet EMI Filters
The ACTIV 10G-EMP™ EMI Filter is the only 100dB EMI filter that is protected against an Electromagnetic Pulse (EMP). Regardless of whether the EMP is a lightning EMP (LEMP), nuclear EMP (NEMP), high altitude EMP (HEMP), or non-nuclear EMP (NNEMP), the filter will protect connected devices against 5000 amps in a 20x500 nanosecond pulse (designated as E1 in Mil-Std-188-125) or up to 50 amps in a 1.5x3000 microsecond pulse (designated as E2 in Mil-Std-188-125). The convenient filter package and RJ45 input/RJ45 output design make the ACTIV 10G-EMP™ the simplest method to upgrade your enclosures to an EMP protected enclosures.
As a member of the DJM Electronics ACTIV™ brand Ethernet filters, the ACTIV EMP™ utilizes proprietary technology that provides 100dB performance from 10kHz to 18GHz and higher. Based on digital signal processing technologies, our ACTIV™ EMI filters faithfully reproduce Ethernet signals without electromagnetic interference.
We guarantee that ACTIV™ Ethernet Filters will not interfere with your network, increase hop counts or degrade network performance - a common problem with standard signal line filters.
|
Surge Suppression Performance
EMP Surge Suppression
E1 5kA 20/500 ns
E2 50A 1.5/3000 µs
Voltage Pulse L-to-L 134Vpk@100A; 10/1000µs
Response Time 5 ns
EMI Filter Performance
Shielding Effectiveness
100dB from 10kHz to 40GHz
Shielding Effectiveness performance measured using a method based on IEEE 299-2006
Insertion Loss
100dB from 0.05kHz to 40GHz
Insertion Loss performance measured using a method based on MIL-STD-220B
Radiated and Conducted Emissions
- Exceeds FCC Part 15 A, B
- Exceeds EN 55022 Class A, B
- Exceeds MIL-STD-461 RE102
- Exceeds MIL-STD-461 CE102
ACTIV™ Ethernet filters are active filters and produce a limited amount of radiated emissions inside the shielded enclosure. Please contact DJM Electronics for information regarding your particular application.
Network Performance
Auto MDI/MDI-X Configuration
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
Auto Negotiation
Automatically configures 10Mbps, 100Mbps, 1Gbps, 2.5Gbps, 5Gbps, 10Gbps
Hot Pluggable
Can be plugged in/out without affecting the filter or other links.
Auto Link Restoration
Automatically re-establishes the network link after a link loss.
Communication Standards
- IEEE802.3 10Base-T (Ethernet)
- IEEE802.3u 100Base-TX (Fast Ethernet)
- IEEE802.3ab 1000Base-T/TX (Gigabit Ethernet)
- IEEE802.3bz 2.5GBase-T/5GBase-T (2.5G/5G Ethernet)
- IEEE802.3an 10GBase-T (10G Ethernet)
Safety and Regulatory
UL File Number
E362686
Standards
- UL 62368-1
- CSA C22.2 No. 62368-1
- EN 62368-1
- IEC 62368-1:2020+A11:2020
- RoHS 2011/65/EU
- RoHS 2015/863
- REACH SVHC
- CA Prop 65
- FCC 47 CFR Part 15.247*AEI
- ICES-003:2020 Ed. 7
- EN 55032:2015+A11
- EN 55035:2017+A11
- EN 61000-3-2:2014
- EN 61000-3-3:2013+A1;A2
- EN 6100-4-2,3,4,5,6,8,11
Environmental
- Operating Temperature: 0ºC - 40ºC (32ºF - 104ºF)
- Humidity: 5% - 90% (non condensing)
Construction
Filter Housing
Aluminum w/Electroless Nickel Plating
Power Requirements
- Input: 100-240VAC; 50/60Hz
- Output: +12V / 2000 mA minimum
(Marked "LPS" or "Class 2" Only)
- DC plug type: 2.1mm x 5.5mm; center positive
Dimensions
TBD
Mounting
- 1-20 UNEF-2A Mounting Stub for Threaded Penetration
- 1" NPS threaded penetration w/brass mounting flange nut and mesh gasket
- 1", 3", 9", 12" or custom length threaded penetration
Connectors
- RJ-45 8P8C Jack (x2)
- 2.1mm x 5.5mm DC Barrel Jack
Indicator LEDs
Power: Red When Power is Present
Link Status (Input/Output)
- 10Mbit - Red
- 100Mbit - Green
- 1Gbit - Dark Blue
- 2.5Gbit - Yellow
- 5Gbit - Purple
- 10Gbit - Light Blue
|
|
|
|
